If the Pacific Northwest is known for rain, then it should also be known for rain chains. The flare for arts and metal sculpture makes Seattle the perfect place to turn drizzle into music. I’ve always loved the lotus-cup rain chains (below) on my aunt & uncle’s post-and-beam cabin in Sequim, Washington.
Sadie relaxes in the shade by the Sequim house.
Rain chain water collects in an anchor bowl.
My house has three downspouts across the front that I’ll replace with rain chains. I purchased four 8’ Ring Rain Chains, three gutter adapters, and three anchoring basins.
Overview of the house, with downspouts on each end and at the center.
I decided to start with the short end of the house. I had always thought the bank of forsythia made the garden look somewhat lopsided, so it was easy to part with the one on the end. (Plus, it looks great at Rosemary’s house! #WillWorkForPlants)
For drainage, I filled the hole first with large rocks, then with pea gravel that I had leftover from the greenhouse installation. Finally, I topped the hole with round decorative beach rocks and an anchor bowl. (Note: I later decided to drill holes in the bottom of the bowl to avoid the mosquito breeding ground.)
Digging out the forsythia.
Big rocks.
Pea gravel for drainage.
Decorative rocks and anchor bowl.
First rain chain done!
Inside the gutter.
Rain chain #2
Water pours easily down the chain in a deluge. (Sorry for the crappy through-the-screen pic… as you can see, it was raining outside!)
I expected a little splashing, and since my deep eaves put the gutters about two feet away from my house, I don’t have to worry too much about damage.
Heavy rain.
Roses & rock river.
